Services
Insulation Removal & Replacement
Old, wet, pest-damaged or fire-and-smoke-affected insulation vacuumed out and replaced — a clean attic floor, sealed and re-insulated in one project.
Most insulation can be topped up and forgotten. Some can't: insulation soaked by a roof leak, matted with pest debris, contaminated by droppings, or left smoke-damaged after a scare. Covering that over doesn't fix it — it entombs it, odors and all, above your ceilings. Removal is the honest first step, and it's heavy, dusty work that needs the right equipment: a high-powered vacuum system that pulls the old material straight into sealed bags outside.
Once the floor is bare, you get the rare chance to do the job completely right: every leak in the attic floor is visible and gets sealed, any damage is plain to see and repair, and fresh insulation goes down over a clean, tight boundary. Removal projects leave with the attic in better shape than the day it was built.
What's included
- Vacuum removal of blown-in and batt insulation, bagged outside
- Wet, pest-damaged, contaminated or smoke-affected material removed
- Bare-floor air sealing included — every leak visible, every leak closed
- Damage found during removal documented with photos for you
- Fresh insulation installed to full depth in the same project
Book Your Free Assessment
Tell us what you need and we'll call you back to confirm. Rather talk now? (855) 640-0404 — answered 24/7.
How it works
Our Process
Assess & document
We inspect and photograph the existing insulation and confirm removal is genuinely warranted — if a top-up suffices, we'll say so.
Contain & protect
The access path is protected and the vacuum system is staged outside; the mess leaves through the hose, not your hallways.
Remove & seal
Old material comes out completely; the bare floor is then air-sealed leak by leak.
Re-insulate
New insulation is installed to full, verified depth — and you get before-and-after photos of the whole arc.
Questions
Insulation Removal & Replacement — FAQs
Dry, clean, merely thin insulation gets topped up. Wet, moldy, pest-contaminated, urine-soaked or smoke-damaged insulation gets removed. If you're not sure which you have, the free assessment settles it — with photos, not opinions.
The system is sealed from attic to truck: insulation travels through the vacuum hose into bags outside. We protect floors and furnishings along the access route and treat pest-contaminated material with appropriate care and protective equipment.
You can — but an uninsulated attic floor is a serious comfort and energy problem in any season, so most homeowners pair removal with replacement in one project. If you stage it, we'll quote both ways.
Yes — nesting and waste from raccoons, squirrels, mice or bats is one of the most common reasons for removal. We coordinate the order of operations: the entry points must be addressed so the new insulation stays clean, and we'll flag that clearly in your quote.